CIGWELD TRANSMIG 355i COMPACT MIG WELDER

SKU W1003511

Product Details

CIGWELD’s Transmig 355i is a powerful 3phase 3in1 Multi-Process inverter that operates at 355A@60% Duty Cycle and offers exceptional welding results across MIG, STICK and TIG, and the added convenience of CIGWELD’s AUTO SET MIG feature for optimal plate thickness control.

The AUTO SET MIG Process has been pre-programmed with synergic lines determined by material type, plate thickness and consumable diameter reduce your setup time and ensures you are always getting the best from your welds.

The Transmig 355i has an easy-to-use push-button design, convenient memory storage, and is loaded with advanced features to ensure you can always customise your welds.
And best of all you can operate it as a compact inverter or with a remote 4RX feeder^

FEATURES:

Superior arc characteristics and duty cycle
Smooth, stable arc performance at 355A @ 60%.
Push Pull Gun Compatible
Compatible with the CIGWELD TBI Push Pull Torch (#185P958180) with Sync Box (#590P958000).
Spool Gun Compatible
Compatible with the Tweco SGT250 Spool Gun (#W4011250)
Voltage Reduction Device (VRD)
Built in as standard
Generator Compliant
14KVA
Power Input
3 PHASE 415V
Robust Design
IP23S designed for heavy duty fabrication

4 Roll Feeder
Driven by a robust 4 Roll drive system to ensure smooth wire feedability
Memory Push Button
Easy access memory to store up to 15 of your favourite welds
Gas Purge / Wire Inch Push Buttons
Easy access push buttons to either purge shielding gas through the torch, or feed wire without wasting shielding gas.
User Friendly
Simple to use push button design
Adjustable Advanced Features
Burnback, Inductance, 2T/4T, Spot/Stitch Weld, Pre/Post Flow, Crater Fill, Crater Current, Crater Volts, Run In, Creep Feed & Down Slope.
Auto Set Plate Thickness Control
Pre-programmed with synergic lines determined by material type, plate thickness and consumable diameter

3 IN 1 Multi-Process
A true multi-process machine offering outstanding welding results across MIG, Stick TIG.
Auto Set Process
Auto Set parameters for MIG.
Determined by material type, thickness & consumable diameter.
Current Range
Current range for this Power Source is 30 to 355A (MIG Mode) of DC Welding Output.
Heat Trim
Customisable Heat Trim Function allows user to tweak voltage for optimal performance (in AUTO SET MIG only).
Push Button Interface
Simple Push button display for easy navigation.

Arc Control
Variable inductance for softer arc and less spatter or stronger arc and increased penetration.

Warranty
3 Year Limited Warranty*
*Refer to the operating manual for further details.

Transmig 355i Compact Plant
Part Number: W1003511

OPTIONAL ACCESSORIES:

Tweco Fusion 400 MIG Torch, 3.6m, Euro OTWF412X3545
Tweco No. 4 MIG Torch, 3.6m, Euro OTWX412/3545
Tweco No. 4 MIG Torch, 4.5m, Euro OTWX415/3545
Tweco SGT 250 Spool Gun W4011250
CIGWELD TBi Push-Pull Gun, 8m 185P958180
CIGWELD TBi Push-Pull Gun, 12m 185P9581C0
CIGWELD TBi Push-Pull Gun Neck, 40 degree 185P001002
CIGWELD TBi Synchroniser Box 590P958000

TIG Torch 17V with 4m lead (200A@20%) W4013801
TIG Torch 17V with 4m lead and remote control (200A@20%) W4013800
TIG Torch 26V with 4m lead (240A@20%) W4014601
Transmig 355i Trolley with inbuilt cylinder carrier W4015005
Feed Roll 0.6/0.8mm V groove (hard) 7977729
Feed Roll 0.9/1.2mm V groove (hard) (fitted) 7977703
Feed Roll 1.2/1.6mm V groove (hard) (fitted) 7977346
Feed Roll 0.8/0.9mm U groove (soft) 7977733
Feed Roll 1.0/1.2mm U groove (soft) 7977730
Feed Roll 1.2/1.6mm U groove (soft) 7977348
Feed Roll 0.8/0.9mm V groove knurled (flux cored) 7977734
Feed Roll 1.2/1.6mm V groove knurled (flux cored) 7977347

CLICK HERE FOR ADDITIONAL INFORMATION

Save this product for later